SpinnySpinny

Everything is working fine with the loom, I’ve decided to weave one long strip of fabric and cut it apart for the coasters. The sari silk yarn is very textured, which tends to make the selvedges a little messy. In general, it’s weaving ok although once in a while I have to stop and untwist a snarl. It’s still a single. I’m using a stick shuttle (the only thing I have that will hold enough thick yarn) and doing a very narrow fabric, so I end up fiddling with the weft every pick anyway. I think for a wider fabric, I’d skein and set the twist again under high tension before weaving with it to reduce the tendency to snarl.

So with my first project on the loom, I can tell you one thing I’m not doing again is using all twelve harnesses for plain weave. I did it just to make sure everything was working correctly and get a feel for threading. But every shed is lifting six harnesses, along with all those extra heddles. That’s pretty heavy for no good reason.

The heddles are back on, I decided to only put 150 per harness because I had them already counted out in groups of 50. If I need more than 1800 heddles for something, I think I can go back and put them on. I think it will be a while before I get to that.

Of course, as soon as I got everything together, I had to warp something. That’s what I’ve been doing instead of updating the website. I had just enough on a tube of carpet warp to match some sari silk yarn. I’m planning to do some coasters, if it turns out well I’ll give a set to the guy I got the yarn from. He’s a local, and I’ve helped him out at a few shows.

And, now that the camera is better behaved, I have a picture!

It’s huge. After working with this, I know I’ve been correct all these years in turning down offers of 60 inch looms. This one is quite enough, thank you. Even trying to reach through twelve harnesses to thread the thing is entertaining. And to think I was looking for a 36 inch, 4 harness.

There are a few things to work out in the warping procedure, the first is to find some way to lock the beater in place for sleying. Trying to wrestle with yarn and sley hook while the reed keeps moving is no fun. My other Leclerc had this problem as well, I don’t know why there isn’t some standard way of dealing with it. And there is also the same old problem of getting wire heddles to move around when you want them. I can see I’m going to have to undo the clips that hold the heddle bars in place every time I thread this thing. Otherwise the heddles won’t move. Even after I tied on to the back, I was still trying to get the heddles in place so the warp lies straight. Fortunately, undoing the top clip is enough. I’d never get the bottom ones back on after threading.