SpinnySpinny

Now I have an indigo project on the loom, finally. I’ve been playing with indigo resist techniques for a while and last summer got around to dying enough cotton yarn for a real project. It started off baby pink, but one of the interesting things about indigo is it will generally pull the chemical dye out. So it’s all shades of blue, lighter where I tightly tied the skeins in four places, darker where they were not. There is about 800g total, which should be enough for a vest.

I thought about combining it with another yarn, but I wanted to keep it all indigo. Plus using it with a solid color would make the white spots less visible. So I worked out how much warp and weft I could get based on the towels (similar yarn.) Winding from skein to balls was a bother, but I don’t have two swifts and I was measuring two ends together. I set aside the ball that had a bunch of knots and, much to my amazement, only found one knot while measuring warp. To get as much as possible out of it, I knotted each bundle and tied on both front and back with cords. It’s a pain, but it cuts my loom waste by about half. I did my calculations in yards because I already had the yards per pound number for this yarn, so this warp is 18 inches in the reed at 20 ends per inch for 7 yards. I estimated half again as much weft as warp as woven, and if I’m off I’ll finish off with some similar solid blue yarn just to weave the full length. I could use any extra fabric for facings or something else where it won’t show.

Having just taken a similarly-sized project off the loom, I didn’t pay much attention to how my heddles were arranged but just started threading. Bad Idea. I got almost done and realized I needed about a dozen more heddles on the edge. I actually pulled out and swapped heddles for the shaft that needed the most, but after recovering from that mess I decided to cut some off and do the repair heddle trick for the rest. It trashes heddles, but I didn’t want to untangle the mess again. I have more (as soon as I figure out where I put them.) I could have just threaded the remaining ends on some empty shafts, I’ve got twelve of the damn things, but that would mean more loom waste, plus lifting twice as many shafts with each pick for basically no good reason. I’ll waste a couple heddles instead.

So on to the weaving. The skeins were tied in four places in a 1.5 m skein and my warp isn’t very wide, so I was concerned that would start to make strange patterns in how the light spots aligned in my fabric. (Think bad 70s variegated knitting yarns.) To keep the pattern of light spots as random as possible, I’m weaving with two shuttles. Two picks each (so they don’t get twisted around each other) in a plain 2/2 twill. The focus of this fabric is the dyed yarn, so I didn’t want a complicated fabric to be a distraction. But for a garment I do want the drape of a twill. The advantage of weaving yardage for sewing is that the selvedges don’t have to be perfect. Mine are pretty good normally, but this time I don’t have to pay attention to how well I join on new weft. I’m just leaving it hang off the edge.

Two shuttles is slow, but I’ve got it arranged so that the first two sheds are the right shuttle and the last two sheds the left. I pick up the shuttle, weave two picks, and put it back where it came from. Feet and hands are always doing the same thing, in the same order, so when I forget it’s more obvious something is wrong. It’s not a big deal here, but it will do well to practice for later when I’m doing a real two color design.