SpinnySpinny

The towels are coming along, very nicely since I finally got some end-feed shuttles and a new bobbin winder. No more snagging bobbins for me! As soon as I remember to not overfill the pirns, anyway. The first couple were a little much. When it works, it works very well as there are no moving parts. But you do have to wind the pirns carefully so they unwind neatly.

This warp is in twill stripes, so it’s one shuttle and almost no thought. My only concern is getting them the same length. I’m hemstitching the ends, a look I like very much for towels, but boy is it a pain. The hemstitching takes almost as much time as the weaving. But I don’t have any matching finer yarn to do a nice hem. I did the first towel in a diamond twill, to give it a try, but it doesn’t work very well with my stripe arrangement. I need something to keep in my desk at work, so it will be fine and with the same color weft you really have to pay attention to see that the design is a little odd. I am using contrasting color weft for the others and the stripes are much more obvious.

The loom is working well, although if I’m going to do anything wider on only four shafts I’m going to have to pull out the extra heddles or maybe even buy more. Yes, I could spread it out among the others but that makes threading more annoying and the tie-up more complicated. Most of what I want to do is still four shaft or at most some obvious variation thereof. (I’m thinking of a double-width twill blanket, which still would be only eight.)

I got the towels warped this weekend and they look pretty good. I’m pleased I had no warping errors. I’m not so pleased that I had some design issues that needed to be resolved, mostly the result of starting with a partial sketch and an idea rather than a proper draft. But I checked the number and arrangement of the blocks in the reed before I started threading and caught what might have been a real mess (extra repeat in the middle.)

The other problem was threading one of the selvedges backwards, which just happened to result in it matching up exactly with the edge of the pattern design. (The selvedges are threaded on two additional shafts, so it wasn’t obvious.) So instead of two ends together in my nice basketweave, it made three. Taking one out and making the pattern just slightly narrower was less distracting that three ends together, so I did that. What I didn’t want to do was take out and re-thread 12 ends after I had already tied on and woven my header. Twelve doesn’t sound like a lot out of well over 300, but it’s still a big pain that I would rather avoid. One of the nice things about working with finer yarns and closer setts is you can take an end out here and there and it’s usually not a big deal.

Finally back to textile stuff. I’ve been sewing new work clothes (not to mention working) but that’s not very interesting to talk about here. But at last I’ve started measuring warp for the next set of mill-end cotton towels. I know, not very exciting. But I have to start somewhere.

The last go I wasn’t happy with the sett, so this time I’ll make it a little more open and that should soften up the fabric. I’m also going to do 2/2 twill throughout, so even if it isn’t quite enough it should be fine. The biggest problem with the other one is that it curled at every block change, and from 1/3 to 3/1, that was a big deal. Now the blocks will all be 2/2.

I have banished the evil baby yarn from my life. I shall only think uplifting thoughts of fine silk and handspun wool.

All of that to re-sley and it still looked horrible. The closer sett seemed to make no difference on how the weft packed in and I’m not going to sit there and slowly ease each and every pick of a six meter warp into place. I’ve cut handspun warps off the loom when they weren’t behaving, I’m not going to let this one intimidate me into weaving it off.

Now I just have to decide what to do next. I think it will be more of the 8/2 cotton, but I can’t warp it right now because I need to leave the loom folded until Holiday Party Season is over. I know better to leave something around where 35 guests can all go “oooh” and “ahhh” and stick fingers or drop cookies in it. Our friends are nice people, but that’s just tempting fate. I could start measuring, however.

Last week I bought a bunch of silk fabric, so now I get to play with it. I wet out a piece of organza and sorta madly crinkle-pleated it into a bundle and dumped blue and purple dye all over it. I know I used far, far too much dye because organza weighs nothing, but it was what it took to get the fabric good and squishy damp. We’ll see how it comes out after it sits for three hours in the steamer. The one downside of all this clearance silk dye I bought. If I get really ambitious, I’ll stitch some gathering threads into it (by machine, thank you) and try some shibori the next time we do an indigo party somewhere.

This morning I just sat down and finished sleying the nasty acrylic warp. It really didn’t take all that long, but I really didn’t want to do it. It’s been a while since I’ve had a weaving project I hated this much before I even get started. I think it will be better with the closer sett and will I end up with some functional fabric. I could just cut it all off and put on those holiday gift dish towels I’ve been meaning to get to but I don’t hate it that much quite yet. This is the hard part, once I get to the point I can actually weave it will go quickly.

It doesn’t help at all that I really don’t know what I want to do with this when I’m done. The entire thing was practice in warping back to front (which I’m not likely to do again unless I have to.) I have this vague idea that it will be a small blanket of some kind but if I’m not wanting to finish warping it I’m surely going to find some reason to put off seaming three panels together to finish a blanket. There are so many other things that sound more interesting, like making the new work clothes I need or washing the dishes. Yes, washing the dishes is more interesting than re-sleying a warp I don’t like. If it’s still ugly when I start weaving, off to the trash can it goes and I’ll start measuring some nice friendly 8/2 cotton.