SpinnySpinny

The heddles are back on, I decided to only put 150 per harness because I had them already counted out in groups of 50. If I need more than 1800 heddles for something, I think I can go back and put them on. I think it will be a while before I get to that.

Of course, as soon as I got everything together, I had to warp something. That’s what I’ve been doing instead of updating the website. I had just enough on a tube of carpet warp to match some sari silk yarn. I’m planning to do some coasters, if it turns out well I’ll give a set to the guy I got the yarn from. He’s a local, and I’ve helped him out at a few shows.

And, now that the camera is better behaved, I have a picture!

It’s huge. After working with this, I know I’ve been correct all these years in turning down offers of 60 inch looms. This one is quite enough, thank you. Even trying to reach through twelve harnesses to thread the thing is entertaining. And to think I was looking for a 36 inch, 4 harness.

There are a few things to work out in the warping procedure, the first is to find some way to lock the beater in place for sleying. Trying to wrestle with yarn and sley hook while the reed keeps moving is no fun. My other Leclerc had this problem as well, I don’t know why there isn’t some standard way of dealing with it. And there is also the same old problem of getting wire heddles to move around when you want them. I can see I’m going to have to undo the clips that hold the heddle bars in place every time I thread this thing. Otherwise the heddles won’t move. Even after I tied on to the back, I was still trying to get the heddles in place so the warp lies straight. Fortunately, undoing the top clip is enough. I’d never get the bottom ones back on after threading.

Just because I have given up on getting this yarn done in time for the San Mateo County Fair, that doesn’t mean I’m not working on it. I finished spinning all the fiber I had prepped a few weeks ago, so now I’m back to flicking wool. I’ve been doing a lot of sorting and messy prep work on the kitchen floor, as it’s the easiest to clean. Flicking wool throws little bits of junk everywhere no matter how I try to contain in. I’m going to vacuum and mop in the morning anyway because we have guests coming over, so I figured this would be as good a time as any. The loom parts are put away for tomorrow.

While I was at the store the other day, I got some Ashland Bay top in two identical colorways of Merino and Merino/tussah. Again, everybody was shocked I bought something not natural color, but I’ve been branching out. I’m also coming to terms with commercial top and feel better about spinning it. I’d still much rather do all my own prep, but I’ve gotten better at spinning commercial top without too much reworking (as long as I’m not overly fussy about the results.) Since the two blends are the same except for fiber content, I had this idea to weave a twill block pattern with one in the warp and one in the weft. When you do this with two colors, you get some blocks more the warp color and others more the weft color. If the colors contrast enough, you get this shimmery op-art sort of effect.

The two yarns would differ only in sheen, the silk being reflective and the Merino matte. I haven’t tried anything like this before but the theory makes sense. At any rate, it should make nice fabric. It will be singles, and I’ll almost certainly do one with S twist and the other with Z. I’m not sure which, however, so I want to experiment with twist direction in another fiber first. I bought some discount (because it had some bad spots) brown Blue Faced Leicester top a few weeks ago for exactly that purpose.

I haven’t had much to say because most of it has been pretty dull. I’ll spare you the details of the not-family-friendly conversations I’ve had with the inkjet printer over alignment. I did some research at the library and worked on more writing. Oh, and I changed my jury service so I don’t have to go the week before I need to mail all this stuff off. Isn’t that thrilling?

I am doing some spinning at least, I got the fine textured cotton done, reeled a bobbin of silk (and glued another together into a sticky mess) and today I’m doing singles for a lofty cable yarn. That one is fairly mindless, a nice break. I’ve been warned that The Boyfriend might be coming home early from his business trip, I hope it’s not before I can vacuum up the fiber that’s all over the floor.

I have a third millspun reproduction and the Andean swatch now. The swatch is drying, so it will be a while before I can get pictures up. But on the second attempt, it worked nicely. A little weird warp tension here and there, and I have no clue about the traditional way to finish these things, but it’s done. I spent most of the day weaving, once I got it warped the correct way, it went quickly. Even if I did forget where I was every other pick for the first two repeats. I even found a use for those 0000 double pointed knitting needles I foolishly bought — they work great as shed sticks for needle weaving the starting edge. I wove in various ends that could conveniently be woven in and neatly tied off the rest. The other end has a fringe, to show how the overtwisted warp works and also because I didn’t want to fight to open smaller and smaller sheds.

Tomorrow is another fleece-buying opportunity, err, spinning event. I’m sure I will see all kinds of things there that I just Must Have Right Now, but I will have to avoid temptation. I already have too much raw fleece sitting around the living room in plastic bags because I can’t put it in the storage unit like that and it takes forever to wash 400g at a time in the sink. I was going to bring the swatch to weave but once I got into it I realized it was too fussy because I didn’t know the pattern very well. But I did get the bread started for my potluck dish! I had to promise The Boyfriend that I’d make a little one just for him, he really likes bread and I don’t bake as often as I used to. (Yes, I did indeed make the trek west with my wagon full of household goods and a jar of sourdough starter. I haven’t used commercial yeast for about eight years now.)

Last night was the monthly get-together at the local spinning shop. I picked up a few things I’ve been needing: new drive band, shed sticks for weaving and FLYER CLIPS!! Finally I can replace the nearly-dead ones on the Insanely Fast Flyer. Plying this Andean stuff just kills them. I’ve been trying to locate some replacements for months. Was it last summer? I don’t even remember anymore. I also got some Egyptian cotton top, which I will try for the fine cotton yarn and see if I like it better than the Pima. I picked up some alpaca/silk, not normally something I am interested in, to try it with the supported spindle. Early results are mixed, I may end up with the cotton pencil roving after all and this turns into a holiday gift exchange goodie. I really didn’t want to do a whole skein of cotton on the supported spindle. I’d rather not do anything on the supported spindle at all, actually.

With The Boyfriend gone for the weekend, I’m getting a lot done. The Cascade-alike is drying and it is a bit fuzzy but other than that looks pretty good. I stuck all four bobbins on knitting needles in a plastic box to ply and that worked ok. It only tried to shred a little bit. It looks kinda like somebody washed a skein of Cascade 220, so I guess that’s not too bad. Not that I’m washing this stuff. I sprayed it with water and hung it to dry to set the twist.

I created a new Misfit this morning by attempting to copy some things that I see all over in the yarn stores, a thick and thin bulky spiral. It looks exactly like something I’d expect to find put up in a 50g ball and selling for $15. The thick parts are too thick and although it looks good now it is so low-twist that it would start to pill even just trying to knit it. Sound familiar? I don’t like the ones in the stores for the same reason. I did it again with the fat single a little more even and it is more stable. It looks disturbingly like something from Lion Brand. But it’s a special effect yarn from a blend of fibers, in this case wool, silk and ingeo. The sky blue silk/ingeo blend from before didn’t spin up as smooth as I’d hoped, so I did something else and used it for the binder with a big Merino single. I knew there was a reason I bought that bump of black top.

I have to spin more of the cotton/silk blend, because I don’t have enough for the wpi card. Fortunately I had some blended fiber left. I did a little but I need more, this stuff is so thin that there’s going to be like 30 meters wrapped around the little piece of cardboard. In the interest of avoiding that nuisance, I started on the camel hair. I’m doing another cable, in two colors and fairly thick. It will go fast. That’s a good thing.

Now I can get back to my reheated pizza. The Boyfriend goes away and see what happens? It’s not all bad, at least. There are vegetables. And soy cheese (because I can’t have very much of the real stuff.) I ordered two so I’d have it for a few days, the place messed up my order and in fixing it I ended up with four huge pizzas. I gave away a bunch and we will still be eating it for a week. At least it’s good pizza.